What is Wave Optics?

 Physical optics, or wave optics, describes light behavior in terms of "waves."

This branch of optics addresses phenomena such as interference, diffraction, and polarization because waves are electromagnetic with an equal amount of energy stored in the electric and magnetic fields perpendicular to each other.

Comments

Post a Comment

Popular posts from this blog

Application of Structured light projection

Structured light projection (SLP) is a non-contact optical metrology method which can measure to the micron scale. The technique involves projecting a known light irradiance pattern onto the surface under test, which then scatters the light creating a 3D image on the surface. The scattered light is recorded by one or more cameras and the scattered pattern is compared to the modeled projected pattern to determine the surface profile.  For a test surface to be measurable with the SLP technique, it must be a scattering surface over the spectrum of light that is projected on to it. Typically, visible light is used for a SLP device, as the light sources and projection mechanisms are more straightforward to achieve, although another wavelength can be used when necessary. Figure below demonstrates a projected fringe pattern that was captured by a camera, and the corresponding surface that was calculated. Surface height accuracy The surface height features that are measurable by the SLP te...
Read more

What is Reflective Coatings?

Image
A very important coating is a reflective version that produces mirrors, coated on the front or back transparent optical material or on the front surface of metallic substrates. This kind of coating reflects a high amount of energy (light in the visible range), which is important for its intended use. As the AR coatings, reflective coatings are also designed for different regions of the spectrum. Aluminum is the most common metallic coating material. Table below shows different kinds of coating materials and the percentage of reflection in different wavelengths. The other type of optical coating used for reflection purposes is the dielectric coating, which uses thin layers of transparent dielectric materials with different refractive indices (e.g., magnesium fluoride or calcium fluoride) and various metal oxides that are deposited onto the optical substrate.
Read more

Applications of Machine vision

Image
Machine vision is a very wide area, encompassing practically any system that uses a camera and processing unit to perform an inspection or measurement task. The hardware is typically off-the-shelf components (e.g., telecentric camera) with potentially custom software written to control the devices. The systems help automate processes, speed up manufacturing, and increase yield by replacing a task done by a human that can fatigue and make mistakes. Surface defect inspection Machine vision systems have become widely used in production environments for their automation of an operator’s manual inspection process. Such systems can be used to quantify the geometric dimensions of mechanical features [12]. More recently, machine vision has been applied to the assessment of optical surface quality (scratch dig), typically a task performed by an expert operator. The automation of surface quality inspection affords a repeatable and standardized assessment at the cost of single-purpose systems...
Read more